Permacultureglobal.org - the interactive map and database of the Worldwide Permaculture Network

Parkland Permaculture

Details

Commenced:	01/11/2014
Submitted:	08/01/2015
Last updated:	01/11/2015
Location:	Box 141 2 Mountain Avenue, Kelwood, Manitoba, CA
Phone:	(204) 967-2739
Climate zone:	Cold Temperate

My Projects

(projects i'm involved in)

Parkland Permaculture

Kelwood, CA

Followers

Back to Parkland Permaculture

Solar Kiln Update

Project: Parkland Permaculture

Posted by Tim Engbrecht about 9 years ago

So I've finally finished my solar kiln, and as I write, it is in the process of drying a lovely load of local ash.

The build cost somewhere between $1000 - $2000 dollars, all told, and probably took in the neighbourhood of 50 - 100 hours to complete, working nearly exclusively by myself. If I did it again, it would certainly go quite a bit faster, since I wouldn't have to trouble-shoot as I went along.

The kiln is a smaller, modified design based on this article: http://www.homepower.com/view/?file=HP63_pg50_Scanlin

...but whereas their's can accommodate 16 foot lumber, I built mine with a 12 foot by 8 foot base (3 sheets of plywoood), which provides sufficient capacity to dry just under 1000 board-feet of lumber with a maximum length of 11 ft 2 inches.

The kiln runs on 2 solar (pv) cells which drive an array of 17 small 12-volt fans mounted in a knee-wall on the south side of the kiln. These draw air through the heat-exchanger (5 layers of black aluminum window screen) which runs in the structure's rafter cavity, and blows the heated air through the lumber stack whenever the sun is shining. There is no battery storage--when the sun shines, the fans blow.

So far, the HOTTEST temperature I've observed in the kiln was at 4:30pm on September 18th, when it hit a whopping 80.4 CELSIUS (177 degrees F.)!

Of course it cools off every evening, which permits the lumber to 'rest' and allows moisture levels to regulate, which apparently is desireable to prevent case-hardening and other stresses in the wood.

This kiln was born out of high lumber prices and access to a woodlot, which resulted in my purchase of a small bandsaw mill (Woodmizer LT15). From my calculation, the kiln will pay for both itself AND the sawmill before it has finished drying its second load of hardwood! (calculated based on the current price of hardwood like white oak and ash, which I have a significant supply of, even if I restrict myself to windfall.)

Here are some pictures of the finished kiln! I would be happy to make plans available or discuss the project in more detail, if anyone is interested!

-Tim Engbrecht

Parkland Permaculture

Comments (0)

You must be logged in to comment.

Courses Taught Here!

Project Badges

Administrators

Team Members

(close)

Legend of Badges

Note: The various badges displayed in people profiles are largely honesty-based self-proclamations by the individuals themselves. There are reporting functions users can use if they know of blatant misrepresentation (for both people and projects). Legitimacy, competency and reputation for all people and projects can be evidenced and/or developed through their providing regular updates on permaculture work they’re involved in, before/after photographs, etc. A spirit of objective nurturing of both people and projects through knowledge/encouragement/inspiration/resource sharing is the aim of the Worldwide Permaculture Network.

	Member A member is a permaculturist who has never taken a PDC course. These cannot become PDC teachers. Members may be novice or highly experienced permaculturists or anywhere in between. Watch their updates for evaluation.
	Permaculture Matchmaker One of these badges will show if you select your gender and the "I'm single, looking for a permaculture partner" option in your profile.
	PDC People who claim to have taken a Permaculture Design Certificate (PDC) course somewhere in the world.
	PDC Verified People who have entered an email address for the teacher of their PDC course, and have had their PDC status verified by that teacher. Watch their updates for evaluation.
	PRI PDC People who’ve taken a Permaculture Research Institute PDC somewhere in the world.
	PDC Teacher People who claim to teach some version of PDC somewhere in the world.
	PRI Teacher With the exception of the ‘Member’ who has never taken a PDC, all of the above can apply to become a PRI PDC Teacher. PRI PDC Teachers are those who the PRI recognise, through a vetting board, as determined and competent to teach the full 72-hour course as developed by Permaculture founder Bill Mollison – covering all the topics of The Designers’ Manual as well as possible (i.e. not cherry picking only aspects the teacher feels most interested or competent in). Such teachers also commit to focussing on the design science, and not including subjective spiritual/metaphysical elements. The reason these items are not included in the PDC curriculum is because they are “belief” based. Permaculture Design education concerns itself with teaching good design based on strategies and techniques which are scientifically provable. PRI PDC Teachers may be given teaching and/or consultancy offerings as they become available as the network grows.
	Aid Worker The individual with this badge is indicating they are, have, or would like to be involved in permaculture aid work. As such, the individual may or may not have permaculture aid worker experience. Watch their updates for evaluation.
	Consultant The individual with this badge is indicating they are, have, or would like to do paid permaculture design consultancy work. As such, the individual may or may not have permaculture consultancy experience. Watch their updates for evaluation.
	Community Project Community projects are projects that help develop sustainable community interaction and increase localised resiliency.